Products - Oil Pollution Sludge Control - P43® Rotary Jet Mixer

Eliminates crude oil sludge, maximises production, increases profitabilityand reduces overall environmental impact.

Information about P43® Rotary Jet Mixer can be found below. If further information is required please [contact Abar Solutions] for assistance.

The P43 submerged rotary jet mixer directs powerful jets of oil that sweep through the sludge on the floor of the oil storage tank and blends the soluble hydrocarbons into the total contents.

There are two types of operation:

1. Tank cleaning tool - In this case the P43 would be mounted on the shell of the tank for a short period of time.
2. Permanent installation - Normally positioned in the centre, except in special circumstances. For example, in the event there is a centre mounted pipe from the roof for de-watering, (drainage) purposes, P43's would be shell mounted. With shell mounted units 2, 3 or even 4 units may be needed together with interconnecting pipe work to connect to the pump.

The P43 submerged rotary jet mixer is used to prevent sludge accumulations. When installed permanently, the P43 can control sludge efficiently, while operating intermittently. This can vary dependent upon the condition and characteristics of the oils. The P43 directs single or opposed jets of oil horizontally across the tank, slowly rotating at a programmed rate. This sweeping action across the tank bottom cuts, re-suspends, and homogenises the valuable hydrocarbons that normally would become trapped in the sludge.

Benefits of the P43:

• Safe
• Efficient
• Cost Effective
• Reliable
• Permanent